SRcomm SR-RPTR-1RU-V DMR Analog/Digital 16CH 50W VHF 136-174mnhz Repeater
Included Items:
SRcomm SR-RPTR-1RU-V DMR Analog/Digital 16 Channel 50 Watt VHF 136-174mnhz Repeater
Model Number:
SR-RPTR-1RU-V
Product Information:
As a DMR repeater product with ergonomic design, totally digital functionality, the DR600 helps to improve management efficiency and a faster response in emergency situations.
Features:
Professional 1U Design
Professional 1U design saves installation space.
Outstanding Heat Dissipation
The unique cooling design combines a built-in heat pipe and four fans design ensuring very efficient heat dissipation, preventing the repeater from over-heating in high output power mode.
Smart Digital-Analog auto detection
DR600 can be configured to analog, digital or mixed mode. When configured to mixed mode, the repeater can dynamically switch between analog and digital depending on the type of call it receives.
Accessory Expansion
DR600 supports third party development via a rear port of the repeater. This is achieved via the pin control through the repeater ports. Sip and AIS protocol supported for easy expansion.
IP Connecting
IP connection is a function which enables repeaters in different areas to switch data, voice and packets over a TCP/IP based network.
LED Indicator
9 LED indicators on the front of panel enables you to identify the repeater status clearly.
Software Upgradable to DMR Tier2 or Tier3
The advanced features can be upgraded to your existing DR600 repeaters by software without purchasing a new one. By software upgrade, the repeater can be used as a DMR Tier2 repeater or DMR Tier3 transceiver.
|
General |
|
|
Channel Capacity |
64 |
|
RF Output |
45W(VHF) / 40W(UHF) |
|
Transmitting Current Drain |
<15A(45W) |
|
Frequency Range |
136-174MHz / 400-470MHz/350-400MHz/450-520MHz |
|
Channel Spacing |
12.5kHz / 20kHz / 25kHz |
|
Dimensions |
482.6*450*44mm (19x17.72x1.73in) |
|
Weight |
11.2kg (24.7lb) |
|
Operating Temperature |
－30℃～+60℃ |
|
Operating Voltage |
DC13.8±20% Option：AC 100—250V 50/60Hz |
|
Storage Temperature |
－40℃～+85℃ |
|
ESD |
IEC 61000-4-2（level 4） |
|
Max Duty Cycle |
100% |
|
Transmitter |
|
|
Frequency Stability |
±0.5 ppm |
|
RF Output |
45W(VHF) / 40W(UHF) |
|
FM Hum and Noise |
－40dB@12.5kHz －45dB@20kHz/25kHz |
|
Conducted/Radiated Emission |
-36dBm@<1GHz, -30dBm@>1GHz |
|
Adjacent Channel Power |
-60dB@12.5kHz, -70dB@20kHz/25kHz |
|
FM Modulation Mode |
12.5KHz：11KΦF3E 25KHz：16KΦF3E |
|
Modulation Maximum Deviation |
2.5kHz@12.5kHz , 4kHz@20kHz/5kHz@25kHz |
|
Audio Response |
+1dB，－3dB |
|
Audio Distortion |
< 3％ |
|
Vocoder |
AMBE++/NVOC |
|
4FSK Digital Modulation |
12.5KHz（data only）:7K60FXD, 12.5KHz（data+voice）:7K60FXE |
|
Receiver |
|
|
Frequency Stability |
±0.5 ppm |
|
Analog Sensitivity |
<0.30μV (12dB SINAD) |
|
Digital Sensitivity |
<0.30μV (5%BER) |
|
Intermodulation |
TIA603：75dB ETSI：75dB |
|
Adjacent Channel Selectivity |
TIA603：70dB @ 12.5 kHz / 75dB @ 20/25 kHz |
|
ETSI: 70dB @ 12.5 kHz / 75dB @ 20/25 kHz |
|
|
Spurious Response Rejection |
TIA603：75dB ETSI：70dB |
|
Conducted Spurious Emission |
－57dBm@ < 1GHz，－47dBm @> 1GHz |
|
Rated Audio Distortion |
< 3％ |
|
Hum and Noise |
－40dB@12.5kHz, - 45dB@20kHz/25kHz |
|
Audio Response |
+1dB，－3dB |